Basic Plane Wave Parameters

26 de nov de 2014
Gratuitas Descarga
1
Ultima versión:
1.0

User enters frequency in GHz, Er & Ur, pushes the "Calculate" button and this app calculates phase velocity, wavelength and impedance. As an example, enter 3 for GHz, 7 for Er and 3 for Ur, then push calculate. This should result in 6. 547E7 m/sec for the phase velocity, 0. 0218 m for the wavelength and 246. 9 Ohms for the impedance.

Paquete:
com.eeautocalc.planewaveparameters
Desarrollador:
Randle C. Sink
Categoria:
Herramientas
Tamaño:
828 KB
Requiere android:
2.2 y versiones superiores
Años:
Everyone
Actualizado:
26 de nov de 2014
Descargas:
100

Similares

1.38
Abiro Converter
2
Welcome to Abiro Converter! Duction.
3.217.76
.apk
Push Ups Workout
217K
Train with your Device! Your personal trainer for free.
3.19.15
.apk
Oeticket com
354
With the oeticket. Com app for Android.

Aplicaciones de Randle C. Sink

1.0
ECM J/S ratio
1
For Electronic Counter Measures this app is used to determine the jammer-to-signal...
1.0
Microwave Skin Depth
1
At microwave frequencies, use the app to determine the skin depths...
1.0
NTSC S/N Ratio
1
For a standard NTSC satellite signal enter baseband video bandwidth in MHz.
1.0
TDMA in Fixed Station Network
1
This app is used to determine the number of voice channels that each earth...
1.0
Earth Station G/T Ratio
4
This app requires users to enter earth station antenna diameter overall...
1.0
Microwave Power Density
21
This app can be used to find the power density in the main beam...
1.0
Earth Antenna Received
39
Knowing the gain of the receiving antenna.
1.0
Radar Range Equation
This app is for finding maximum range for detecting a target using the Radar...
1.0
Equivalent Noise Temperature
To determine the noise figure of a device use the relationship NF= in/ out.
1.0
System Noise Temperature
27
This is the noise model of a receiving antenna.
1.0
ECM J/S ratio
10
For ECM, this app is to calculate the J/S ratio for the stand-off jammer situation.
1.0
Astable 555 Timer
3
Adding a second resistor Rb to the 555 timer and connecting the trigger input...